ST107S CLASS 2 INTEGRATING SOUND LEVEL METER

ST107S CLASS 2 INTEGRATING SOUND LEVEL METER

ST-107S is a high performance conforms to international IEC61672-1:2002 Class 2 Integrating Sound Level Meter. It may also survey: SPL(Lxyp), Lxmax, Lxmin, Lxeq, SEL (LAE), Lcpeak, RT60.

Three kinds of at the same time frequency weighting: A, C, Z and;
Three kinds of at the same time weighting (F, S, I)

It may simultaneously survey many kinds of appraisal target, the dynamic range is bigger than 100dB, it does not need to select the measuring range when doing measurements, the operation is simple.

Request Quote

SPECIFICATIONS

Display	Double rows LCD MAX reading 1999
Display Refresh Rate	1 Time/sec
Major Applicable Standards	IEC 61672-1：2002 Class2 JJG-188-2002 Class 2
Other Standards	IEC60651:1979 TYPE 2 IEC60804:2000 TYPE 2 ANSI S1.4:1983 Type12
Microphone	½"pre-polarized condenser microphone build in preamplifier: 1V/Pa@250HZ, frequency range: 20 Hz~12.5 kHz, Thermal noise: <25 dB(A)
Measurement Items	Lxyp, Lxmax, Lxmin, Lxeq, LAE, Lcpeak, RT60
Measurement Range	30dB ~ 130dB (A) 35dB ~ 130dB (C) 40dB ~ 130dB (Z)
Dynamic range	100 dB
Integrate Time Setup	Manual, 10s, 1m, 5m, 10m, 30m, 1h, 8h, 16h, 24h
Internal memory	24C512 × 4 ；MAX Datalogger data ＞37,000
Micro SD Card	The max support capacity of micro-SD card is 32GB；37,000 data about story space 300KB
Peak Value Measurement range	70~133 dBC
Time Weighting	Fast, Slow, Impulse, Peak
Frequency Weighting	A/C/Z
Frequency Range	20Hz~8KHz
DC Output	2Vdc/130dB
AC Output	2Vrms/130dB
Starting Time	＜10 Second
Dimensions	285x90x39mm (length x width x height)
Weight	Approximately 500 grams. (Including Batteries)

ST107S CLASS 2 INTEGRATING SOUND LEVEL METER

Products

JALC INSTRUMENTS